If you're pricing out siding replacement in Irving or anywhere else in Dallas County, you've probably already noticed that quotes swing wildly from one contractor to the next. That's not always a scam — siding pricing genuinely depends on material, house size, tear-off complexity, and how much hail and wind damage is hiding under the surface. Below is an honest breakdown of what siding replacement actually costs in this part of North Texas, what makes the number move, and how to read a quote so you don't overpay or get underinsured against the next storm.
For a typical single-family home in Irving — roughly 1,800 to 2,600 square feet of exterior wall area — most full siding replacement projects land somewhere between $9,000 and $28,000 installed. Vinyl siding tends to sit at the lower end of that range, fiber cement (like HardiePlank) sits in the middle to upper-middle, and engineered wood or higher-end lap profiles with heavier trim packages push toward the top. These are ranges, not quotes — the only way to get an actual number is a measured estimate on your specific house.
A few things push Irving and greater Dallas-Fort Worth pricing in a particular direction compared to other parts of the country. First, labor costs in DFW have climbed with the region's construction boom, so installer availability and scheduling lead times affect price more than they used to, especially in spring and early summer when hail season keeps every siding and roofing crew in North Texas booked out. Second, this region's siding almost always has to be rated for wind and impact performance rather than just looks, which changes which products even make sense to bid. Third, most homes here have brick or stone on at least part of the elevation, and matching, flashing, and transitioning new siding around masonry is more labor-intensive than a straight vinyl-to-vinyl tear-off, which is common in other markets.
The single biggest variable in Irving is hail history. Dallas County sits inside one of the more hail-active corridors in the country, and a roof or siding system that's taken repeated hits over several storm seasons often has hidden cracking, granule loss on impact-rated products, or fastener damage that isn't visible from the ground. If your siding needs to come off anyway because of storm damage, tear-off and disposal costs are usually similar to a voluntary remodel, but the scope can grow once the crew gets behind the old panels and finds rotted sheathing or water intrusion around windows — that's an add, not something a fair contractor should have priced in blind.
A complete siding quote should spell out material brand, style, and thickness or gauge; whether it's tear-off or overlay; house wrap or weather barrier replacement; flashing details around windows, doors, and roof-to-wall intersections; fastening schedule (this matters more here than in calmer climates, given straight-line wind events that regularly hit 60-70 mph during spring storm season); trim, corner post, and J-channel scope; disposal and dumpster costs; and a written timeline. If a quote is just a single lump-sum number with no line items, that's a signal to ask more questions before signing anything.
It's also worth asking directly whether the bid assumes the sheathing underneath is sound. Any competent contractor will tell you they can't know that for certain until the old siding comes off, and a fair contract should spell out a per-sheet or per-linear-foot rate for sheathing replacement if rot or storm damage turns up, rather than leaving that number open-ended.
The biggest mistake homeowners make is comparing a single total number across contractors without checking that they're pricing the same scope. A $10,000 bid and an $18,000 bid on the same house usually aren't different opinions about labor rates — they're different scopes, different materials, or one of them is missing something the other included. Line up material brand and product line, tear-off vs. overlay, whether house wrap is included, and warranty terms (both manufacturer and workmanship) side by side before you look at the bottom line.
Be cautious with any contractor who shows up uninvited after a hailstorm, pressures same-day signature, or asks you to sign an insurance assignment of benefits before they've even inspected the house. Storm-chasing crews are a real pattern in North Texas after major hail events, and some disappear before warranty work is ever needed. Ask for a local business address, ask how long they've been doing exterior work specifically in DFW, and ask for a couple of past addresses you can drive by — not necessarily formal references, just proof the work exists and has held up through at least one Texas summer and one hail season. Alpine Exteriors will walk through scope, material options, and manufacturer wind and impact ratings line by line, and that kind of side-by-side transparency is a reasonable bar to hold any contractor to.
If your siding is being replaced because of documented hail or wind damage, your homeowners policy may cover part or all of the cost, subject to your deductible and the insurer's assessment of the damage. Texas insurers frequently apply separate, higher deductibles for wind and hail claims than for other perils — sometimes a percentage of the dwelling coverage rather than a flat dollar amount — so it's worth pulling out your policy and confirming that number before assuming a claim will cover most of the job. An adjuster's initial estimate and a contractor's estimate don't always match, particularly on labor rates and code-required upgrades, and it's reasonable to have your contractor document damage and prepare a supplement request if the insurance estimate falls short of actual repair costs.
If the project isn't insurance-related — you're simply replacing aging or dated siding — financing options through the contractor, a home equity line, or a personal loan are the common paths. Compare the total cost of financing, not just the monthly payment, since promotional zero-interest periods on contractor financing sometimes convert to high deferred-interest rates if the balance isn't paid off in time. Read that fine print before signing.
Most single-family homes take somewhere between one and two weeks from tear-off to final trim, weather permitting. Larger homes, extensive trim work, or discovering damaged sheathing that needs repair can extend that. Spring storm season can also delay start dates industry-wide, simply because crews are stretched thin across the metro.
Neither is hail-proof, but impact-rated products in both categories perform meaningfully better than standard-grade versions. Fiber cement generally resists denting and cracking from hail better than standard vinyl, but it's also more expensive and heavier to install. The right answer depends on your budget, your home's style, and how much weight you put on minimizing future storm-related repairs versus lowering upfront cost.
Adding insulated siding or a foam backer board during a full tear-off can modestly reduce heat transfer through exterior walls, which matters given how long and hot Dallas County summers run. It's not a substitute for attic insulation or window efficiency, but it's a reasonable incremental upgrade to consider while the wall is already open.
Most exterior siding replacement in the City of Irving requires a permit, particularly for full tear-off work that exposes sheathing or changes materials. Requirements can vary by scope, so this should be confirmed with the city and included as part of your contractor's responsibilities, not left for you to sort out separately.
Ranges are useful for budgeting, but the only way to know what your specific house will cost is a walk-around measurement and a look at the current siding's actual condition — including anything hail or wind may have already done that isn't obvious from the driveway. Alpine Exteriors serves Irving and the surrounding Dallas-Fort Worth communities, including Dallas, Fort Worth, Plano, Frisco, Arlington, McKinney, and Denton, and can put together a detailed, line-item estimate so you're comparing real numbers instead of guessing. Reach out for an on-site assessment before you commit to a material or a contractor.