Fort Worth homes take a beating that homes in most of the country never see. Between the hailstorms that roll through Tarrant County most springs, the straight-line winds that follow them, summers that push roof surfaces past 150 degrees, and clay soil that never stops shifting underneath a foundation, the exterior of a North Texas house is under constant, cumulative stress. Alpine Exteriors works on roofs, siding, and windows across Fort Worth and the surrounding communities, and most of what we do is a direct response to those specific conditions — not generic remodeling.
The bulk of our Fort Worth work falls into three categories: hail and wind damage repair or full replacement, siding replacement on homes where the original wood or old vinyl has failed, and window replacement aimed at cutting summer cooling bills. We install architectural and impact-resistant (Class 4) shingle roofing, standing-seam metal roofing for homeowners who want to stop replacing a roof every hail cycle, fiber cement and vinyl siding, and double-pane, low-E vinyl and fiberglass windows. We also handle the smaller jobs that tend to get ignored until they cause bigger problems — fascia and soffit repair after wind events, gutter replacement, and flashing repairs around chimneys and roof penetrations, which is where most Fort Worth roof leaks actually start.
A fair amount of our calendar in any given year is storm-driven: a hailstorm moves through a section of the city, and for the next several months we're doing inspections, insurance documentation, and replacements in that footprint. The rest is planned work — homeowners replacing an aging roof or rotting siding before it becomes an emergency, which is almost always the better and cheaper way to do it.
Fort Worth sits inside what insurers and roofers both call hail alley. Tarrant County sees measurable hail most years, and it's not unusual for a single storm to leave golf-ball-sized or larger stones across a swath of the metro. Asphalt shingles take that impact as bruising and granule loss that isn't always visible from the ground, which is why so many roofs here get replaced not because they're leaking but because an insurance adjuster or contractor found hail damage during an inspection. This is also why Class 4 impact-resistant shingles have become the default recommendation we give homeowners rebuilding after a storm — they cost more upfront, typically a few dollars more per square foot of roofing than standard architectural shingles, but many Texas insurers offer a premium discount for installing them, and they hold up better through the next storm.
Straight-line wind is the other half of the equation. The same weather systems that produce hail often bring gusts strong enough to lift shingle tabs, peel back ridge caps, and tear loose siding panels that weren't fastened correctly. We fasten and flash to withstand those gusts, not just to code minimums, because code minimum is what fails first in a 60-70 mph straight-line event.
Then there's heat. Fort Worth summers regularly push attic and roof-deck temperatures well above 150°F, and that daily swing between a hot afternoon and a much cooler night puts materials through constant expansion and contraction. Over years, that thermal cycling is what causes shingle granule loss, caulk and sealant failure around windows, and siding that warps or pulls away from fasteners. It's also why attic ventilation matters as much as the roofing material itself — a poorly ventilated attic shortens the life of a new roof regardless of how good the shingles are.
Finally, foundation movement. Fort Worth sits on expansive clay soil that swells when it's wet and shrinks hard during dry Texas summers, and that movement shows up on the exterior as cracked stucco, siding that no longer sits flush at the corners, and windows and doors that stop closing squarely. We can't fix a foundation, and we're honest with homeowners about that — if siding or trim keeps cracking in the same spot every year, that's a foundation conversation with a structural engineer or foundation repair company first, not another round of caulk and paint.
We work across Fort Worth's older core neighborhoods — Ryan Place, Mistletoe Heights, Fairmount, Berkeley, Tanglewood, Overton Park, Arlington Heights, and the area around TCU — where homes tend to be 40 to 90 years old and original wood siding, single-pane windows, and undersized attic ventilation are common. We also cover the newer growth corridors: Alliance and north Fort Worth, the Chisholm Trail Parkway corridor, Crowley, Benbrook, Saginaw, White Settlement, Haltom City, and the Lake Worth area. Beyond city limits we regularly serve Dallas, Arlington, Irving, Plano, Frisco, McKinney, and Denton — Fort Worth is our home base, not our whole territory.
The City of Fort Worth requires a building permit for most reroofing work (a full tear-off and replacement), and often for siding replacement and window replacement when the work changes the structural opening or affects an egress window. A repair to a small section of roof or a like-for-like window swap in the same opening sometimes doesn't trigger a permit, but the threshold isn't always obvious, and pulling a permit when one's needed protects you if there's ever an insurance claim or a future home sale inspection. We handle the permit application as part of the job rather than leaving it to the homeowner.
If you're in one of Fort Worth's designated historic districts — Ryan Place, Fairmount, Mistletoe Heights, and a handful of others carry that designation — exterior changes visible from the street, including roofing material, siding, and window style, typically go through an additional design review by the city's historic preservation office before a permit is issued. That review can add a few weeks to a project timeline, so it's worth starting early rather than after a storm has already damaged the roof. Many newer subdivisions also have HOA architectural committees with their own rules on shingle color and siding material — we ask about HOA requirements up front so a homeowner isn't stuck between a completed job and a violation notice.
Storm seasons dictate a lot of our recent project mix. After hail events move through neighborhoods like Wedgwood, Overton Park, and the Alliance corridor, we typically see a run of full roof replacements where the original three-tab or older architectural shingles had reached the point that replacement made more sense than another round of patch repairs — several of those homeowners upgraded to Class 4 impact-resistant shingles specifically to reduce the odds of a repeat claim. In the older core neighborhoods near TCU and in Ryan Place, a common project is replacing original wood lap siding that's rotted at the bottom courses with fiber cement siding, which holds up far better against Fort Worth's heat and humidity swings without the maintenance a wood repaint requires every few years. We've also done a steady run of window replacements in 1950s and 1960s homes around Arlington Heights and Berkeley, where single-pane aluminum windows were driving up summer cooling costs — swapping to double-pane low-E units is one of the more cost-effective upgrades a homeowner in this climate can make, though it's not a project that pays for itself quickly on utility savings alone; the bigger return is comfort and reduced UV fading indoors.
Does homeowners insurance cover hail damage to my roof or siding in Fort Worth?
Most Texas homeowners policies cover hail and wind damage, but coverage details vary a lot by carrier — some policies apply a separate, higher deductible specifically for wind/hail claims, sometimes a percentage of the home's insured value rather than a flat dollar amount. We can document visible damage and work alongside your adjuster, but we'd rather you also read your specific policy than assume it works like a neighbor's.
How long does a full roof replacement take?
A straightforward asphalt shingle tear-off and replacement on an average Fort Worth home usually takes one to three days once materials are on site, weather permitting. Standing-seam metal or jobs with extensive decking repair take longer. The bigger variable most homeowners underestimate is the wait for materials and scheduling after a large hailstorm, when every roofing crew in the metro is booked out.
What's the best siding material for Fort Worth's climate?
Fiber cement holds up better than vinyl against extreme heat and impact and won't warp during thermal cycling, but it costs more installed and is heavier work. Vinyl is more affordable and low-maintenance but can soften and warp in direct summer sun on west-facing walls. There isn't a single right answer — it depends on your budget, the home's orientation, and how long you plan to stay in it.
Do I need a permit to replace windows in a historic Fort Worth neighborhood?
Usually yes if the home is in a designated historic district and the new windows are visible from the street — the city's historic preservation review looks at window style and material, not just the permit itself. It's worth checking before you order windows, since a rejected style means reordering.
If you're dealing with recent storm damage, an aging roof, siding that's started to crack or pull away, or windows that are costing you on summer cooling bills, Alpine Exteriors will come out, inspect the exterior, and give you a straight answer about what actually needs to be done now versus what can wait. Contact us to schedule a free inspection for your Fort Worth home.